Paper Review Records
All Paper Review Records
21 valid samples · Newest publication first
Review days = acceptance date − received date. PDF, DOI, and publisher-page sources are retained.
Co-packed metal hydride and phase change pellets enable rapid hydrogen storage and release
Zhi Li; Zhuofan Chen; Rui Zhou; Puyang Lu; Xianglei LiuShow moreShow less
School of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China; State Key Laboratory of Mechanics and Control for Aerospace Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, ChinaShow moreShow less
Effects of synergistic ultrasonic–NaClO treatment on coal microstructure at different liquid saturations
Xufei Yang; Jiuyuan Fan; Qiming Huang; Hao Xu; Jiuling Zhang; Kuanhong Zhang; Chenjing WuShow moreShow less
School of Emergency Management and Safety Engineering, North China University of Science and Technology, Tangshan, Hebei 063210,China; Hebei Provincial Key Laboratory of Mining Development and Safety Technology, North China University of Science and Technology, Tangshan, Hebei 063210, China; College of Safety and Environmental Engineering, Shandong University of Science and Technology, Qingdao 266590, ChinaShow moreShow less
Controlled interconversion enables synergistic hydroisomerization and hydrocracking catalysts for renewable jet fuel production
Julia T. de Souza; Nilson F.L. de Paula; Natasha M. Suguihiro; Pedro N. Romano; João M.A.R. de AlmeidaShow moreShow less
Escola de Química, Universidade Federal do Rio de Janeiro, Av. Athos da Silveira Ramos, 149, Rio de Janeiro, RJ 21941-909, Brazil; LIPCAT/idLab (Laboratório de Intensificação de Processos e Catálise), Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ 21941-594, Brazil; Instituto de Química, Universidade Federal do Rio de Janeiro, Av. Athos da Silveira Ramos, 149, Rio de Janeiro, RJ 21941-909, Brazil; Campus UFRJ Duque de Caxias Professor Geraldo Cidade, Universidade Federal do Rio de Janeiro (UFRJ) - Duque de Caxias, RJ 25240-000, Brazil; Programa de Engenharia de Nanotecnologia, Alberto Luiz Coimbra Instituto Alberto Luiz Coimbra de Pós-Graduação e Pesquisa de Engenharia (COPPE), Universidade Federal do Rio de Janeiro, Avenida Horacio Macedo, 2030, Rio de Janeiro, RJ 21941-972, BrazilShow moreShow less
Multi-objective optimization of combustion, performance, and emission characteristics of diesel–MTBE–SiO2 fuel blends in a single-cylinder diesel engine using response surface methodology
Emrah ErçekShow moreShow less
Afyon Kocatepe University, Sultandağı High Vocational School, Department of Transportation Services, Afyonkarahisar, TurkeyShow moreShow less
Comprehensive performance assessment of proton exchange membrane fuel cells with fractal gas distribution zones and non-aligned wavy gas-cooling channels
Fanfang Meng; Shuaishuai Wang; Haiping Wang; Qiming Li; Haoyan Fang; Jing Cao; Qingshan Liu; Yong ZhangShow moreShow less
School of Intelligent Manufacturing, Qingdao Huanghai University, Qingdao 266427, China; China Tobacco Shandong Industrial Co., Ltd., Qingdao 266100, China; Qingdao Guoruan Technology Co., Ltd., 266001, China; College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China; Department of Materials Science and Chemical Engineering, Stony Brook University at SUNY, New York NY11794, USA; Wuhan Troowin Power System Technology Co., Ltd., Wuhan 430056, China; School of Automobile, Chang’an University, Xi’an 710064, China; School of Intelligent Manufacturing and Control Engineering, Shanghai Polytechnic University, Shanghai 201209, ChinaShow moreShow less
Selective laser-induced etching enabled study on geometry and surface structure effects on liquid ammonia flash-boiling in micro-scale nozzles
Peter W. Augustin; Marvin Alt; Lukas Heine; Reinhold Kneer; Wilko Rohlfs; Fabian Fröde; Heinz Pitsch; Henry Axt; Christian Hinke; Martin Kratz; Constantin L. Häfner; Manuel A. ReddemannShow moreShow less
Institute of Heat and Mass Transfer, RWTH Aachen University, Augustinerbach 6, Aachen, 52062, Germany; Institute for Combustion Technology, RWTH Aachen University, Templergraben 64, Aachen, 52062, Germany; Chair for Laser Technology, RWTH Aachen University, Campus-Boulevard 73, Aachen, 52074, Germany; Fraunhofer Institute for Laser Technology ILT, Steinbachstr. 15, Aachen, 52074, Germany; RWTH Aachen University, Templergraben 55, Aachen, 52062, Germany; Fraunhofer-Gesellschaft e.V., Hansastraße 27 c, München, 80686, GermanyShow moreShow less
FAQ
How long does Fuel take to review a manuscript?
As of 2026-11-16, CrushSCI has 21 complete review records for Fuel. The fastest paper went from submission to acceptance in 45 days (Performance optimization of improved rectangular baffle proton exchange membrane fuel cell through crested porcupine optimization-back propagation neural network surrogate model, received 2026-07-13, accepted 2026-08-27); the slowest took 326 days. The average is 114.4 days and the median is 95 days.
Expert Matching · Case Demo
Turn Your Submission Goalsinto a Verifiable Journal Plan
Share your field, deadline, and author profile. CrushSCI uses real review records to suggest a title direction, shortlist journals, and estimate timelines.
