CrushSCI.com
118.1Average days
108Median days
43Fastest days
243Longest days
1,1322025 publications

Paper Review Records

All Paper Review Records

15 valid samples · Newest publication first
Review days = acceptance date − received date. PDF, DOI, and publisher-page sources are retained.

122 days

Hierarchical ion-transport pathway engineering in MXene coatings through dual physical and chemical modulation

Authors
Sangho Lee; Jong Dae Jang; Sang-Woo Jeon; Hyungsub Kim; Gyeongjun Kim; Hyeong Min Jin; Ho Seong Lee; Yonghee LeeShow moreShow less
Affiliations
Neutron Science Division, Korea Atomic Energy Research Institute, 111 Daedeok-daero 989 Beon-Gil, Yuseong-gu, Daejeon 34057, Republic of Korea; Advanced Energy Research Institute, Chungbuk National University, 1 Chungdae-ro, Seowon-gu, Cheongju, Chungbuk 28644, Republic of Korea; Department of Organic Materials Engineering, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Republic of Korea; Department of Materials Science and Engineering, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Republic of Korea; Department of Materials Science and Metallurgical Engineering, Kyungpook National University, 80 Daehak-ro, Buk-gu, Daegu 41566, Republic of Korea; Department of Nano & Advanced Materials Science and Engineering, Kyungpook National University, 2559 Gyeongsang-daero, Sangju-si 37224, Republic of KoreaShow moreShow less
Source PDF DOI Publisher page
131 days

Surface nanostructured yarn-ball-like submicron silver powders for low-temperature sintered interconnects

Authors
Jinhua Qin; Jin Yang; Qian Li; Wei Liao; Zhe Huang; Siwei Tang; Minggang Li; Yunzhu Ma; Wensheng LiuShow moreShow less
Affiliations
National Key Laboratory of Science and Technology on High-strength Structural Materials, Central South University, Changsha, Hunan 410083, China; School of Metallurgy and Environment, Central South University, Changsha, Hunan 410083, ChinaShow moreShow less
Source PDF DOI Publisher page
72 days

Mechanism of homogeneous grain refinement in wire arc additively manufactured Al–Zn–Mg–Cu alloy via bulk warm forging-induced microstructural regulation

Authors
Heng Su; Bin Shao; Jiabin Liu; Yingying Zong; Debin ShanShow moreShow less
Affiliations
Key Laboratory of Precision Hot Forming, Harbin Institute of Technology, Harbin 150001, ChinaShow moreShow less
Source PDF DOI Publisher page
82 days

Design of a novel multi-component spatial gradient Cu-Cr-GRA composite contact for synergistic improvement in resistance to arc erosion, wear, and impact

Authors
Shuo Zhang; Zhe Wang; Xiao Hui Zhao; Jun Wang; Chong Qing Fan; Hai Peng Lv; Jun Li; Xue Gui HuShow moreShow less
Affiliations
School of Materials Science and Engineering, Xi'an Polytechnic University, Xi'an 710048, China; School of Physics, Xi'an Jiao tong University, Xi'an 710049, China; Hunan Jiatong New Materials Co., Ltd., Chang de 415000, China; Chang de Jiahui Hydraulic Machinery Co., Ltd., Chang de 415000, China; Chang de Institute of Collaborative Innovation, Chang de 415106, ChinaShow moreShow less
Source PDF DOI Publisher page
89 days

Influence of SiC inner-coating-derived interfacial foundation on the evolution and performance of SiC/HfB₂–MoSi₂–SiC bilayer coatings on thin-walled C/C composites

Authors
Yuxin zhang; Jiao Fan; Qiqian Yang; Zhuoting Lei; Guoliang Dong; Xiaohong ShiShow moreShow less
Affiliations
Shaanxi Key Laboratory of Fiber Reinforced Light Composite Materials, Science and Technology on Thermostructural Composite Materials Laboratory, Northwestern Polytechnical University, Xi'an 710072, ChinaShow moreShow less
Source PDF DOI Publisher page
62 days

Contribution of strain-induced martensite in cold-rolled 304 stainless steel quantified by decoupling of strengthening mechanisms

Authors
Yu Zhang; Yulin Chen; Jiawei Gu; Dehou Yang; Jian ZhangShow moreShow less
Affiliations
Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology, School of Intelligent Manufacturing, Jiangnan University, Wuxi 214122, ChinaShow moreShow less
Source PDF DOI Publisher page

FAQ

How long does MATERIALS CHARACTERIZATION take to review a manuscript?

As of 2026-11-13, CrushSCI has 15 complete review records for MATERIALS CHARACTERIZATION. The fastest paper went from submission to acceptance in 43 days (Strengthening aluminum alloy welds via ultrasound without reduction in the average grain size, received 2026-05-21, accepted 2026-07-03); the slowest took 243 days. The average is 118.1 days and the median is 108 days.

Expert Matching · Case Demo

Turn Your Submission Goalsinto a Verifiable Journal Plan

Share your field, deadline, and author profile. CrushSCI uses real review records to suggest a title direction, shortlist journals, and estimate timelines.

We will reply within 30 minutes.

CrushSCI online

Client

I work in environmental engineering and need an SCI paper published within three months. I have no grant funding or prominent co-author. Which journals could I target?

CrushSCI

Yes. We will first screen for feasibility against the 90-day deadline, then identify comparable papers without grant support or prominent co-authors. The final shortlist will prioritize research quality and journal scope.

Suggested title
Machine Learning and Life-Cycle Assessment for Predicting and Optimizing Carbon Emissions in Urban Wastewater Treatment

SampleLatest 5 valid paper samples from 2026

Average review59.6 days

Median65 days

Contact CrushSCI

Contact CrushSCI

Leave your email address to discuss academic polishing, structural refinement, or one-to-one guidance.

We will reply within 30 minutes.

Selected service: Academic Consulting Service

Leave your email address

Or email us directly at leader@crushsci.com

Enter your email address so we can reply. Your details will remain private.