CrushSCI.com
143.0平均天数
133中位天数
57最短天数
290最长天数
1192025发文量

Paper Review Records

全部论文审稿周期

25 篇有效样本 · 按发表日期由新到旧排列
审稿天数=录用日期-收稿日期;保留 PDF/DOI/网页源链接

171 天

Low-Velocity Impact Response Prediction of 3D Orthogonal Woven Composites Based on Machine Learning Approach

作者
Chunjian Mao; Tianhuan Chen; Chao Zhang展开收起
作者单位
1. State Key Laboratory of Mechanics and Control for Aerospace Structures, Nanjing University of Aeronautics and Astronautics, Nanjing, China; 2. School of Mechanical Engineering, Jiangsu University, Zhenjiang, China展开收起
PDF源文件 DOI 网页
112 天

Low-Velocity Impact Damage and Compression-After-Impact Failure Mechanisms of Al/CFRP Fiber Metal Laminates

作者
Yixuan Zhou; Kejun Hu; Yaoguo Shi; Qinghe Shi; Fengling Zhao展开收起
作者单位
1. School of Materials Engineering, Jiangsu University of Technology, Changzhou Jiangsu, China展开收起
PDF源文件 DOI 网页
146 天

Degradation Mechanisms and Residual Flexural Strength Assessment of Thermoplastic Fiber Metal Laminates After Low-Velocity Impact

作者
Zhang Yiben; Shi Yushan; Chen Mingji; Li Lijun; Kang Yiting展开收起
作者单位
1. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing, China; 2. Beijing Key Laboratory of Lightweight Metal Forming, Beijing, China; 3. School of Transportation Science and Engineering, Beihang University, Beijing, China展开收起
PDF源文件 DOI 网页
137 天

Mechanical Behavior of Composite Laminates with In-Plane and Through-Thickness Distributions of AFP-Induced Layup Gap Defects

作者
Shulin Chen; Shaonian Pang; Di Yang; Weiwei Qu; Xiaoxiao Zhang; Yinglin Ke展开收起
作者单位
1. State Key Laboratory of Fluid Power and Mechatronic System, School of Mechanical Engineering, Zhejiang University, Hangzhou, China; 2. Key Laboratory of Advanced Manufacturing Technology of Zhejiang Province, School of Mechanical Engineering, Zhejiang University, Hangzhou, China; 3. Hangzhou Aimeiyi Aerospace Manufacturing Equipment Co., Ltd, Hangzhou, China; 4. Donghai Laboratory, Zhoushan, China展开收起
PDF源文件 DOI 网页
127 天

Trajectory-Informed Finite Element Modeling and Experimental Characterization of Triangular Gap Defects in Double-Curved Automated Fiber Placement Composite Panels

作者
Wei′an Ren; Xianhua Chen; Jiandong Hu; Hua Ma; Liqing Yan; Jun Ma展开收起
作者单位
1. Chongqing University, Chongqing, China; 2. Jiangxi Hongdu Aviation Industry Group Co., LTD, Nanchang, China; 3. Nanchang Key Laboratory of Manufacturing Technology and Equipment for Resin-based Carbon Fiber Composites, Nanchang, China展开收起
PDF源文件 DOI 网页
180 天

Comparative Experimental and Numerical Analysis of Mechanical Properties of Sandwich Plates and Honeycombs with Different Cells Configuration Manufactured by Material Extrusion Additive Technology

作者
K. Avramov; B. Uspensky; I. Derevianko; K. Maksymenko-Sheiko; A. Salenko; D. Myrzaliyev; A. Usserov展开收起
作者单位
1. Anatolii Pidhornyi Institute of Power Machines and Systems of the National Academy of Sciences of Ukraine, Kharkiv, Ukraine; 2. Department of Technical Systems, Kharkiv National University of Radio Electronics, Kharkiv, Ukraine; 3. Department of Aircraft Strength, National Aerospace University N.Ye. Zhukovsky “KhAI”, Kharkiv, Ukraine; 4. Yangel Yuzhnoye State Design Office, Dnipro, Ukraine; 5. National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kiev, Ukraine; 6. Mukhtar Auezov South Kazakhstan Research University, Shymkent, Kazakhstan展开收起
PDF源文件 DOI 网页

FAQ

APPLIED COMPOSITE MATERIALS审稿要多久?

截至2026-11-18,CrushSCI 收录了 APPLIED COMPOSITE MATERIALS 的 25 篇完整审稿记录。最快一篇从收稿到录用用了 57 天(Influence of Coupling Agents and a Carbodiimide-Based Hydrolysis Stabilizer on the (Thermo)Mechanical Properties and Water Degradation of Poly(L-Lactide)- and Polyamide 11-Based Flax Fiber-Reinforced Composites,2026-05-27 收稿,2026-07-23 录用),最慢一篇用了 290 天;平均 143.0 天,中位数 133 天。

Expert Matching · Case Demo

把投稿要求,转成可验证的期刊方案

说清专业、时限和作者背景,CrushSCI 结合真实审稿样本,给出拟题方向、期刊初筛与周期判断。

我们会在半小时内回复。

CrushSCI 在线

客户询问

我是环境工程专业,需要一篇 SCI,希望 3 个月内见刊。没有基金,也没有大牛挂名,可以投哪些期刊?

CrushSCI回复

可以。先按 90 天时限做可行性筛选,同步查找无基金、无知名作者挂靠的典型论文案例,作为选刊依据。重点核对研究质量与期刊 scope。

拟题建议
《融合机器学习与生命周期评价的城市污水处理碳排放预测与优化》

样本口径2026 年最近 5 篇有效论文样本

平均审稿59.6 天

中位数65 天

Contact CrushSCI

联系 CrushSCI

留下手机号或微信号,我们将与你确认学术润色、结构优化或一对一辅导咨询需求。

我们会在半小时内回复。

当前选择:学术咨询服务

预留联系方式

也可以直接发送邮件至 leader@crushsci.com

手机号和微信号至少填写一项,仅用于本次咨询联系,不会公开。