Paper Review Records
全部论文审稿周期
15 篇有效样本 · 按发表日期由新到旧排列
审稿天数=录用日期-收稿日期;保留 PDF/DOI/网页源链接
195
天
A Gated Fusion-Enhanced Convolutional Neural Network–Graph Convolutional Network Model for Analyzing Key Microstructural Factors in Local Ductile Fracture Hotspots of Dual-Phase Steels
作者
Lisha Shi; Rui Wang; Shaowei Wu; Chen Yuan; Hui Wang; Yu Liu展开收起
作者单位
1. School of Mechanical Engineering, Nantong University, Nantong, China; 2. School of Mechanical, Materials, Mechatronic and Biomedical Engineering, University of Wollongong, Wollongong, Australia; 3. Institute for Industrial Science, The University of Tokyo, Kashiwa, Japan; 4. School of Mechanical Engineering, Guizhou University, Guiyang, China展开收起
121
天
Reconstruction of 3D Grain Size Distributions from 2D Cross Sections
作者
Musa Norouzian; Showmic Islam; Joseph A. Turner展开收起
作者单位
1. Department of Mechanical Engineering, Florida Polytechnic University, Lakeland, USA; 2. Mechanical and Materials Engineering, University of Nebraska-Lincoln, Lincoln, USA; 3. Center for Nondestructive Evaluation, Iowa State University, Ames, USA; 4. Aerospace Engineering, Center for Nondestructive Evaluation, Iowa State University, Ames, USA展开收起
157
天
Non-negligible Influence of Bending Moments on Grain-Scale Mechanics
作者
Justine M. Schulte; Dalton Shadle; Kelly Nygren; Matthew P. Miller; Tresa M. Pollock; Irene J. Beyerlein展开收起
作者单位
1. Materials Department, University of California, Santa Barbara, Santa Barbara, USA; 2. Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, USA; 3. Cornell High Energy Synchrotron Source, Cornell University, Ithaca, USA; 4. Department of Mechanical Engineering, University of California, Santa Barbara, Santa Barbara, USA展开收起
173
天
Data-Driven Prediction of 3D Printability in Polylactic Acid and Polypropylene-Based Nanocomposites from Rheological and Thermal Features
作者
Burcu Ozdemir; Gemma Herranz; Juan P. Fernandez-Blazquez; De-Yi Wang; Maciej Haranczyk展开收起
作者单位
1. IMDEA Materials Institute, Getafe, Madrid, Spain; 2. Universidad Politécnica de Madrid, Madrid, Spain; 3. Instituto de Investigaciones Energéticas y Aplicaciones Industriales (INEI), Ciudad Real, Spain展开收起
140
天
Computer Vision and Machine Learning Techniques for Optical Micrograph Defect Classification Using a Novel Gray Thresholding Technique
作者
C. R. Hasbrouck; Simon W. Miller; Jay Martin展开收起
作者单位
1. Department of Industrial and Manufacturing Engineering, The Pennsylvania State University, University Park, USA; 2. Applied Research Laboratory, The Pennsylvania State University, State College, USA展开收起
91
天
A Computational Homogenization Framework for Predicting Properties from Multifield Processing Conditions in Polymer Matrix Particle Composites
作者
Denise Widdowson; Dashiell Papula; Anil Erol; Zoubeida Ounaies; Paris von Lockette展开收起
作者单位
1. State College, The Pennsylvania State University, University Park, USA; 2. Fredericks Company, Huntingdon Valley, USA; 3. Northrop Grumman Corporation, Linthicum, USA; 4. University of Maryland, Baltimore County, Baltimore, USA展开收起
FAQ
Integrating Materials and Manufacturing Innovation审稿要多久?
截至2026-11-16,CrushSCI 收录了 Integrating Materials and Manufacturing Innovation 的 15 篇完整审稿记录。最快一篇从收稿到录用用了 86 天(Expert-Grounded Automatic Prompt Engineering for Extracting Lattice Constants of High-Entropy Alloys from Scientific Publications Using Large Language Models,2026-01-18 收稿,2026-04-14 录用),最慢一篇用了 195 天;平均 130.5 天,中位数 123 天。
Expert Matching · Case Demo
把投稿要求,转成可验证的期刊方案
说清专业、时限和作者背景,CrushSCI 结合真实审稿样本,给出拟题方向、期刊初筛与周期判断。
