CrushSCI.com
252.6Average days
156Median days
70Fastest days
892Longest days
1672025 publications

Paper Review Records

All Paper Review Records

20 valid samples · Newest publication first
Review days = acceptance date − received date. PDF, DOI, and publisher-page sources are retained.

213 days

Development of sustainable lightweight clay bricks incorporating date palm waste: effects on structure and performance

Authors
Zina Sdiri; Ali Bennour; Paulo Santos; Daniel Ferrández; Nicoletta Fusi; Wissem GallalaShow moreShow less
Affiliations
1. Laboratory Geosystems, Georesources and Geoenvironments (LR3G – LR21ES05), Faculty of Sciences of Gabès, University of Gabès, Gabes, Tunisia; 2. Laboratoire d’Erémogie et de Lutte Contre la Désertification (LR16IRA01), Institut des Régions Arides (IRA), Médenine, Tunisia, University of Gabes, Gabes, Tunisia; 3. ISISE, ARISE, Department of Civil Engineering, University of Coimbra, Coimbra, Portugal; 4. Escuela Técnica Superior de Edificación, Universidad Politécnica de Madrid, Madrid, Spain; 5. Department of Earth and Environmental Sciences, University of Milano, Bicocca, Italy; 6. University of Sousse, Higher Institute of Fine Arts of Sousse, Sousse, TunisiaShow moreShow less
Source PDF DOI Publisher page
199 days

Titanium foams produced via rapid sintering using ceramic polishing waste as a reactive pore-forming additive: mechanical and thermal properties

Authors
Aysun Ayday; Betül Demir; Elif Eker Kahveci; Derya KırseverShow moreShow less
Affiliations
1. Faculty of Engineering, Department of Metallurgical and Materials Engineering, Sakarya University, Sakarya, Türkiye; 2. Institute of Natural Sciences, Sakarya University, Sakarya, Turkey; 3. Yazaki Company, Akyazı, Türkiye; 4. Faculty of Engineering, Department of Mechanical Engineering, Sakarya University, Sakarya, TürkiyeShow moreShow less
Source PDF DOI Publisher page
118 days

Enhancing hydrophobicity and stabilizing thermal insulation of peanut meal-based foams via methyltrichlorosilane chemical vapor deposition

Authors
Ying Kuang; Jiapeng Wu; Mi Tian; Aiyu Liu; Wen Luo; Junjun Zhai; Kai Chen; Bo Peng; Yi Liu; Fatang Jiang; Kao Wu; Cao LiShow moreShow less
Affiliations
1. Key Laboratory of Fermentation Engineering (Ministry of Education), Cooperative Innovation Center of Industrial Fermentation (Ministry of Education & Hubei Province), National “111” Center for Cellular Regulation and Molecular Pharmaceutics, Hubei Key Laboratory of Industry Microbiology, Glyn O. Phillips Hydrocolloid Research Centre at HBUT, School of Life and Health Sciences, Hubei University of Technology, Wuhan, China; 2. School of Nursing and Health Management, Wuhan Donghu University, Wuhan, China; 3. Faculty of Engineering, University of Nottingham, Nottingham, UKShow moreShow less
Source PDF DOI Publisher page
202 days

High-performance MnFe 2 O 4 @ZIF-8 magnetic composite and its effectiveness in doxycycline removal

Authors
Ming Wen; Juan Yao; Lanmeng Wei; Caixia Fan; Shuaiyang Gao; Xiangfu Gu; Pihui Yang; Anzhong Peng; Haifeng LiShow moreShow less
Affiliations
1. College of Pharmacy, Dali University, Dali, China; 2. The First Affiliated Hospital, Dali University, Dali, ChinaShow moreShow less
Source PDF DOI Publisher page
196 days

Evolution of structure and texture of the Beta zeolite recrystallization-derived materials: Impact of alkaline concentration and exploratory application towards LDPE catalytic pyrolysis

Authors
Julio Colmenares-Zerpa; Analio Dugarte-Dugarte; José Miguel Delgado; Ricardo J. Chimentão; M. F. Melendrez; Eliane Soares da Silva; Ernesto A. Urquieta-Gonzalez; J. B.O. Santos; Kevin Jhon Fernández-Andrade; Serguei Alejandro-Martín; Pedro Rodríguez-SulbaránShow moreShow less
Affiliations
1. Laboratorio de Cinética y Catálisis, Departamento de Química, Facultad de Ciencias, Universidad de Los Andes, Mérida, Venezuela; 2. Laboratorio de Investigación de Procesos Catalíticos y Adsorción (LIPROCAD), Departamento de Fisicoquímica, Facultad de Ciencias Químicas, Universidad de Concepción, Concepción, Chile; 3. Carbon and Catalysis Laboratory (CarboCat), Department of Chemical Engineering, Faculty of Engineering, Universidad de Concepción, Concepción, Chile; 4. Laboratorio de Cristalografía, Departamento de Química, Facultad de Ciencias, Universidad de Los Andes, Mérida, Venezuela; 5. Facultad de Ingeniería, Universidad San Sebastián, Lientur, Concepción, Chile; 6. Research Center on Advanced Materials and Energy, Federal University of São Carlos, São Carlos, Brasil; 7. Departamento de Engenharia Química, Universidade Federal de São Carlos, São Carlos, Brasil; 8. Laboratorio de Cromatografía Gaseosa y Pirólisis Analítica, Universidad del Bío-Bío, Concepción, Chile; 9. Universidad ECOTEC, Samborondón, EcuadorShow moreShow less
Source PDF DOI Publisher page
126 days

Adsorption of antibiotics using fly ash-based NaP1 zeolite modified with lanthanides via ion exchange and wet impregnation

Authors
Agata Jankowska; Rafał Panek; Joanna GoscianskaShow moreShow less
Affiliations
1. Faculty of Chemistry, Department of Chemical Technology, Adam Mickiewicz University, Poznań, Poland; 2. Department of Construction Materials Engineering and Geoengineering, Faculty of Civil Engineering and Architecture, Lublin University of Technology, Lublin, PolandShow moreShow less
Source PDF DOI Publisher page

FAQ

How long does JOURNAL OF POROUS MATERIALS take to review a manuscript?

As of 2026-11-19, CrushSCI has 20 complete review records for JOURNAL OF POROUS MATERIALS. The fastest paper went from submission to acceptance in 70 days (Experimental investigation on hygroscopic kinetics and regeneration behavior of silica gel-modified molecular sieve composite desiccant, received 2025-11-25, accepted 2026-02-03); the slowest took 892 days. The average is 252.6 days and the median is 156 days.

Expert Matching · Case Demo

Turn Your Submission Goalsinto a Verifiable Journal Plan

Share your field, deadline, and author profile. CrushSCI uses real review records to suggest a title direction, shortlist journals, and estimate timelines.

We will reply within 30 minutes.

CrushSCI online

Client

I work in environmental engineering and need an SCI paper published within three months. I have no grant funding or prominent co-author. Which journals could I target?

CrushSCI

Yes. We will first screen for feasibility against the 90-day deadline, then identify comparable papers without grant support or prominent co-authors. The final shortlist will prioritize research quality and journal scope.

Suggested title
Machine Learning and Life-Cycle Assessment for Predicting and Optimizing Carbon Emissions in Urban Wastewater Treatment

SampleLatest 5 valid paper samples from 2026

Average review59.6 days

Median65 days

Contact CrushSCI

Contact CrushSCI

Leave your email address to discuss academic polishing, structural refinement, or one-to-one guidance.

We will reply within 30 minutes.

Selected service: Academic Consulting Service

Leave your email address

Or email us directly at leader@crushsci.com

Enter your email address so we can reply. Your details will remain private.