CrushSCI.com
148.5平均天数
142.5中位天数
63最短天数
217最长天数
2652025发文量

Paper Review Records

全部论文审稿周期

14 篇有效样本 · 按发表日期由新到旧排列
审稿天数=录用日期-收稿日期;保留 PDF/DOI/网页源链接

138 天

Strength evaluation method for adhesive joints under combined normal and shear stresses: A process-zone-based approach

作者
Junichi Kitagawa; Takehisa Yamada; Tatsuhito Honda; Daichi Haruyama; Yamato Hoshikawa; Sohei Kanna; Takahiro Morishita; Itsuki Kawata; Tomonaga Okabe展开收起
作者单位
Materials & Structural Engineering Department, Corporate Research and Development Division, IHI Corporation, 1, Shin-nakahara-cho, Isogo-ku, Yokohama, Kanagawa, 235-8501, Japan; IHI Jet Service Co., Ltd., 3-2-1, Daikanyama, Akishima, Tokyo, 196-8686, Japan; Research Center for Green X-Tech, 6-6-11, Aramaki-Aza-Aoba, Aoba-ku, Sendai, Miyagi, 980-8579, Japan; Department of Aerospace Engineering, Tohoku University, 6-6-01, Aramaki-Aza-Aoba, Aoba-ku, Sendai, Miyagi, 980-8579, Japan展开收起
PDF源文件 DOI 网页
141 天

Preparation and characterization of high-weather-resistant two-component polyurethane thermally conductive structural adhesive

作者
Lu Yan; Zhihui Lin; Yufei Liu; Yibin Sun; Runqing Cai展开收起
作者单位
Guangzhou Power Supply Bureau, Guangdong Power Grid Co., Ltd., China Southern Power Grid Co., Ltd., Guangzhou, Guangdong, 510620, China展开收起
PDF源文件 DOI 网页
109 天

Evaluation of the mechanical behaviour of SLJ joints using numerical methods and uncertainties

作者
Daniel Dametto; Rafael Beck; Felipe Ruivo Fuga; Lucas F.M. da Silva; Volnei Tita; Ricardo De Medeiros展开收起
作者单位
Santa Catarina State University, Center for Technological Science, Department of Mechanical Engineering, Paulo Malschitzki Street, 200, Joinville, 89219-710, Santa Catarina, Brazil; Faculty of Engineering of University of Porto, Department Mechanical Engineering, Rua Dr. Roberto Frias s/n, Porto, 4200-465, Portugal; University of São Paulo, São Carlos School of Engineering, Department of Aeronautical Engineering, Av. João Dagnone 1100, São Carlos, 13563-120, São Paulo, Brazil展开收起
PDF源文件 DOI 网页
144 天

Comparative study of CFRP single lap joints bonded with structural epoxies and a novel hot-melt film adhesive: effects of temperature and loading rate

作者
F.C.C. Ribeiro; H. Malekinejad; R.J.C. Carbas; V.C.M.B. Rodrigues; E.A.S. Marques; Fengzhen Sun; L.F.M. da Silva展开收起
作者单位
Department of Mechanical Engineering, Faculty of Engineering, University of Porto, Porto, Portugal; Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), Faculty of Engineering, University of Porto, Porto, Portugal; School of Mechanical Engineering, Tongji University, Shanghai, China展开收起
PDF源文件 DOI 网页
184 天

Beyond traction–separation laws: High-fidelity modeling of mixed-mode damage in adhesively bonded single-lap shear joints

作者
Chamara Herath; John Erdman; Marcus Stanfield; Stephanie TerMaath; Daniel Hart; Marcias Martinez展开收起
作者单位
Department of Mechanical and Aerospace Engineering, Clarkson University, Potsdam, NY, United States of America; Southwest Research Institute, 6220 Culebra Road, San Antonio, TX, 78238-5166, United States of America; Department of Mechanical and Aerospace Engineering, University of Tennessee, Knoxville, TN, 37996, United States of America; Naval Surface Warfare Center, Carderock Division, 9500 Macarthur Boulevard, West Bethesda, MD, 20817-5700, United States of America; Department of Mechanical and Aerospace Engineering, University of Tennessee-Knoxville, UT-Space Institute, Tullahoma, TN, 37388, United States of America展开收起
PDF源文件 DOI 网页
153 天

Multi-step surface treatment of AA-2024-T3 produces failure mode transition and interfacial strengthening in carbon fiber aluminum laminates

作者
Madni Shifa; Zaigham Saeed Toor; Obaid Ur Rauf; Sanan H. Khan展开收起
作者单位
Department of Mechanical and Aerospace Engineering, United Arab Emirates University, Al-Ain, Abu Dhabi, 15551, United Arab Emirates; Graduate Institute of Ferrous and Eco-Materials Technology (GIFT), Pohang University of Science and Technology (POSTECH), Pohang, 37673, South Korea; Failure Analysis Center, Institute of Space Technology, Islamabad, 44000, Pakistan展开收起
PDF源文件 DOI 网页

FAQ

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES审稿要多久?

截至2026-11-19,CrushSCI 收录了 INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES 的 14 篇完整审稿记录。最快一篇从收稿到录用用了 63 天(Effect of surface treatment and bonding protocols on the bond strength between 3D-Printed denture tooth and denture base resins,2026-06-15 收稿,2026-08-17 录用),最慢一篇用了 217 天;平均 148.5 天,中位数 142.5 天。

Expert Matching · Case Demo

把投稿要求,转成可验证的期刊方案

说清专业、时限和作者背景,CrushSCI 结合真实审稿样本,给出拟题方向、期刊初筛与周期判断。

我们会在半小时内回复。

CrushSCI 在线

客户询问

我是环境工程专业,需要一篇 SCI,希望 3 个月内见刊。没有基金,也没有大牛挂名,可以投哪些期刊?

CrushSCI回复

可以。先按 90 天时限做可行性筛选,同步查找无基金、无知名作者挂靠的典型论文案例,作为选刊依据。重点核对研究质量与期刊 scope。

拟题建议
《融合机器学习与生命周期评价的城市污水处理碳排放预测与优化》

样本口径2026 年最近 5 篇有效论文样本

平均审稿59.6 天

中位数65 天

Contact CrushSCI

联系 CrushSCI

留下手机号或微信号,我们将与你确认学术润色、结构优化或一对一辅导咨询需求。

我们会在半小时内回复。

当前选择:学术咨询服务

预留联系方式

也可以直接发送邮件至 leader@crushsci.com

手机号和微信号至少填写一项,仅用于本次咨询联系,不会公开。